HOW TO GET INVOLVED??

		Home \| HOW TO GET INVOLVED?? \| PROJECT out line \| CRANK SHAFT \| Design Sequence \| Crankshaft bearings and bearing support \| Conecting rod - pistons \| piston and sleeve rings \| Sleeves \| Wet liners \| Block \| Heads \| Sleeve drive mechanism \| Powers take off (drive end) \| Powers take off (non drive end) \| Oil pumps and system \| Water pump and system \| Alternator \| Starter \| Fuel system \| Motor monitoring \| Exhaust / inlet - manifolds \| Turbo charger \| Mounting \| Propeller and governor \| Design specifications and tolerances \| PEREFERD SUPPLIERS \| The competition \| project # 1 links \| DOWN LOADS \| CONTACT
Caroilne Diesel Engine

HOW TO GET INVOLVED??

YOU CAN GET INVOLVED< OR JUST FOLLOW OUR PROGRESS, ENJOY

AS STUDENT:

You can help with design, the drawing (SOLIDWORKS), sorting parts and suppliers.

AS HOBIEST/ VOLENTEER:

All of the above, but if you have been in the industry for a number of years or if you are retired your input will be invaluable. It also dose not matter where in the world you are the components can be built any where and just posted to one central assembly and testing point.

AS MANUFACTUROR / SUPPLIER / FABRICAITOR:

We need as many of you guys as possible! If you can supply any part no matter how small it is it will be invaluable! The bottom line for you guys is to make money, and if your part is specified on the prototypes, you could have a stream of customers for years to come.

This is a volunteer / student project only. There is no aim to make any money from this project. The aim is to produce a Micro-light engine, fly round the world on bio-fuel. We will not pay for any part or service, every thing must be donated in good faith, we are not a charity this is all just for engineers / inventors and the like to have a little fun!

Any money colected will be for a specific item.