Home | HOW TO GET INVOLVED?? | PROJECT out line | CRANK SHAFT | Design Sequence | Crankshaft bearings and bearing support | Conecting rod - pistons | piston and sleeve rings | Sleeves | Wet liners | Block | Heads | Sleeve drive mechanism | Powers take off (drive end) | Powers take off (non drive end) | Oil pumps and system | Water pump and system | Alternator | Starter | Fuel system | Motor monitoring | Exhaust / inlet - manifolds | Turbo charger | Mounting | Propeller and governor | Design specifications and tolerances | PEREFERD SUPPLIERS | The competition | project # 1 links | DOWN LOADS | CONTACT

Caroilne Diesel Engine
sequence of design process

Here is the design process in a step by step progression

I am now looking for :

Workshop time
The next item to be manufactured is the crankshaft
Heat-treated
And pressed together
Polished
Balanced

Design sequence will follow the pages from top to bottom.

 

1 complete design out line

2 build crank

3 add mane bearings and pistons and connecting rods

4 machine up sleeves

5 Machine up wet sleeves

6 machine up sleeves drivers complete with bearings, seal cover and pulleys.

7 machine mane bearing carriers

8 machine up crank case

8b fabricate crank case mounting bracket

9 machine up junk heads

10 machine up non drive end

11 machine up drive end

12 build oil pumps

13 starter assembly

14 water pump

15 Water manifolds and pipes

16 exhaust manifold

17 inlet manifold and intercoolers

18 machine up propeller pitch controller

19 add all auxiliary equipment

19a nde equipment mounting plate

19b alternator

19c fuel injector pump

19d jockey pulley

 

.