 |
Some initial design specifications:
1. Sleeve valve (similar to Hawker Tempest V)
2. Radial bearing on central bearing on crank.
3. Diesel or Bio-diesel (to prevent icing in inlet.)
4. Reduction geared propeller. or constant speed prop.
5. Direct fuel injection.
6. Water-cooled cylinder heads, cylinders, oil-cooled pistons.
7. Dry sump.
8. All auxiliary power taken of from non-drive end.
9. Turbo charged
10. To design an engine that has as few part as possible, that has as many commercially produced parts possible,
11. Keep the price of the complete engine to the customer below £ 5 000.00
|
|
